I later filled in the short pieces with scrap 1x2s.Īttach chalkboard sticker labels to 1x2 boards, centering on the pallet board behind the 1x2. NOTE: Some of the boards are shorter because I was using scrap pieces of wood. Using the 6” spacer wood pieces, attach one 1x2 6” from bottom of the pallet board edge with 1-1/4” nails or staples.Ĭontinue attaching 1x2 boards to the pallet boards, two fasteners per overlap of boards, using the spacers as a guide. Measure the width of the six pallet boards and cut five 1x2 boards to this length. Layout six pallet boards of equal length on a work surface. Use a metal blade on a reciprocating saw.Ĭut the nails between the boards, keeping the fence on your reciprocating saw flush with the pallet, with the pallet secured in place. Instead of trying to pull the nails out, I recommend cutting the nails. Most pallets are nailed together with ringshank nails that are very difficult to pull. Nail or staple to the pallet boards and 1x2 front pieces with 1-1/4” fasteners, edges flush on back and ends. I lightly sanded rough areas but decided to keep a natural finish.Ĭut 1x2 boards to the length of the pallet boards. Repeat steps on top and bottom, cutting a 1x2 board to fit, to complete outer frame.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |